Sfoglia per Autore "Ciambelli, Paolo"
Items 1-20 di 35
-
Advanced polymeric composites for self-healing structural materials
Corvino, Raffaele (Universita degli studi di Salerno, 2012-06-16)This research work rises from collaborative activities between Alenia Aeronautica (Pomigliano D’Arco, Napoli) and the Industrial Engineering Department of University of Salerno. One of the biggest challenge facing materials ... -
Allergenic power reduction of food proteins by nonthermal technologies
De Maria, Serena (Universita degli studi di Salerno, 2015-07-30)The great interest of the research activity in food allergies could be attributed to the increase of allergic reactions all over the world not only in infants but even in adult age. As an alternative to the development ... -
A chemical-toxicological study of animal models exposed to organohalogen environmental contaminants
Ambrosio, Letizia (Universita degli studi di Salerno, 2013-10-14) -
Continuous supercritical emulsion extraction: process characterization and optimization of operative conditions to produce biopolymer microspheres
Falco, Nunzia (Universita degli studi di Salerno, 2012-07-04)Controlled release systems for therapeutic drugs have received extensive attention in recent years, due to their great clinical potential. Biodegradable microspheres are well-recognized systems to control the release rate ... -
Design, synthesis and biological evaluation of new non-nucleosidic inhibitors od DNA methyltransferases
Viviano, Monica (Universita degli studi di Salerno, 2013-04-03)The inactivation of tumor suppressor genes, which often results from epigenetic silencing associated with DNA hypermethylation, plays a pivotal role in the development of most forms of human cancer. Moreover, there are ... -
Development of dosimeters with selective materials to high frequency radiation
Funaro, Maria (Universita degli studi di Salerno, 2013-01-23)The clinical use of ionizing radiation to obtain a necrosing or cytotoxic radiobiological effect on tumoral lesions requires wide and complex physical and dosimetrical procedures. In particular, it is necessary to calculate ... -
Development of selective materials and methods for analytical techniques combined with mass spectrometry
Euterpio, Maria Anna (Universita degli studi di Salerno, 2015-04-23)Mass spectrometry (MS) is a powerful detection technique that has become very important in several chemical disciplines for detection of both small molecules (environmental pollutants, small metabolites) and large biomolecules ... -
Dispersion of inorganic fillers in polymeric matrices for food packaging applications
Bugatti, Valeria (Universita degli studi di Salerno, 2012-06-14)The objective of this PhD project regards the formulation, preparation and characterization of polymeric materials in which lamellar inorganic solids containing potentially active molecules are dispersed. In particular ... -
The effect of temperature on flow properties of powders
Tomasetta, Igino (Universita degli studi di Salerno, 2012-06-18)Changes of cohesive flow properties of powders at high temperature are observed in many industrial process units, such as fluidized bed reactors, granulators and dryers. Many authors investigated the behaviour of powders ... -
Flexible Barrier Materials for Improving the Durability of Photovoltaic Devices
Rossi, Gabriella (Universita degli studi di Salerno, 2014-04-28)The economic viability of photovoltaic (PV) devices is strongly dependent upon equipment cost and durability. During their usage, these devices are exposed to several atmospheric degradation agents and thus they need to ... -
Fluidized Bed Torrefaction of Agro-Industrial Residues: the Case Study of Residues from Campania Region, Italy
Brachi, Paola (Universita degli studi di Salerno, 2016-04-20)The purpose of this Ph.D. project was to investigate the potential of the torrefaction treatment for upgrading low-value agro-industrial residues into useable solid fuels to be employed as high-quality energy carriers. The ... -
Foam Injection molding with physical blowing agents
Volpe, Valentina (Universita degli studi di Salerno, 2015-04-20)Foam injection molding uses environmental friendly blowing agents under high pressure and temperature to produce parts having a cellular core and a compact solid skin (the so-called “structural foam”). The addition of a ... -
Forest fire modelling
Malangone, Luca (Universita degli studi di Salerno, 2015-04-21)Wildland fires have always been undesired and dangerous events. The danger includes the destruction of a renewable natural resource, damage of the atmospheric environment through the emissions of pollutant gases, which ... -
From graphene synthesis to applications
Cirillo, Claudia (Universita degli studi di Salerno, 2014-10-13)Graphene is the first two-dimensional (2D) atomic crystal available to us. Since its discovery in 2004, graphene has captured the attention and the imagination of worldwide researchers thank to its supreme properties. Catalytic ... -
Green processes based on SC-CO2: application to materials of biomedical interest
Baldino, Lucia (Universita degli studi di Salerno, 2015-05-25)This research is focused on the production of structures of biomedical interest using supercritical assisted processes: Supercritical freeze extraction, Supercritical gel drying and Supercritical phase separation. These ... -
High Cell Density Cultivation to Produce Heterologous Proteins by S. cerevisiae Strains: a Holistic Approach to Investigate and Optimize the System
Landi, Carmine (Universita degli studi di Salerno, 2014-04-22)The research of this PhD thesis has been focused on the study and realization of high cell density cultivation (HCDC) systems with auxotrophic strains of the yeast Saccharomyces cerevisiae, these latter to be used as hosts ... -
High thermal conductivity catalysts for the CO-WGS process intensification
Pisano, Domenico (Universita degli studi di Salerno, 2016-04-27)Today, the increasingly serious lack of resources and the obsolescence of the plants present on the whole planet led to develop new ways that go beyond “traditional” chemical engineering. The research is now focusing on ... -
Improving the aircraft safety by advanced structures and protecting nanofillers
Raimondo, Marialuigia (Universita degli studi di Salerno, 2014-04-24)Inspection and Maintenance are important aspects when considering the availability of aircraft for revenue flights. Modern airframe design is exploiting new exciting developments in materials and structures to construct ... -
In silico and in vitro models in pharmacokinetic studies
Cascone, Sara (Universita degli studi di Salerno, 2015-04-21)One of the aims of the thesis was to design and realize an in vitro device able to reproduce the gastrointestinal behavior. To reproduce the temperature and pH history an USP apparatus II coupled with a control system ... -
Innovative catalysts for process intensification of methane reforming and propane dehydrogenation reactions
Ricca, Antonio (Universita degli studi di Salerno, 2014-06-27)In the early decade, a rapid increase in oil consumption was recorded, that led to a widening between the predicted demand for oil and the known oil reserves. Such trend, mainly due to the growing new economies, is causing ...