Show simple item record

dc.contributor.authorDe Meo, Annarita
dc.date.accessioned2022-12-05T16:03:44Z
dc.date.available2022-12-05T16:03:44Z
dc.date.issued2020-06-19
dc.identifier.urihttp://elea.unisa.it:8080/xmlui/handle/10556/6268
dc.identifier.urihttp://dx.doi.org/10.14273/unisa-4354
dc.description2018 - 2019it_IT
dc.description.abstractMicroinjection molding (μIM) is one of the most efficient processes for wide scale production of thermoplastic polymer microparts. In order to produce high-quality microinjection-molded components, a crucial aspect to be fully understood and optimized is the filling of the cavity by the polymer. The standard injection molding process with constant mold temperature control suffers from problems caused by the large temperature difference between the mold and the incoming polymer. The mold temperature appears to be a key parameter for the fabrication of microparts of a more large range of materials. Even though variotherm technology has existed for decades and includes many kinds of heating methods, it is still not a proven one for use with μIM. Therefore, in the literature, the polymer melt flow phenomenon in a cavity for μIM with rapid variations of temperature is still not well discussed. In this thesis, a special surface-conditioning concept that fulfils rapid temperature evolutions during the μIM is designed and adopted to extend the freezing time and affect the morphology of semicrystalline polymers. The dynamic temperature concept is based on a multilayer cavity with thin heating elements, thermocouples and insulation layers: it permits to increase the temperature of an amount of 100°C in a few seconds and obtain a cooling time of about 10 s. The system is used for the μIM of a poly-lactid acid (PLA) and an isotactic polypropylene (iPP). The PLA is a biodegradable polymer with a low crystallization rate. Calorimetric analysis on pellets of PLA permitted to study the crystallization behavior in quiescent conditions and set a temperature for the annealing steps during the process. In this manner, the system for the temperature control was adopted to influence the final crystallinity of the PLA, by applying isothermal steps. Furthermore, the system was used to apply different thermal histories in different zones of the sample after the solidification in the microcavity and generate a crystalline phase and an amorphous one in the same part. Morphology modifications were analyzed by means of optical observations, calorimetric analysis, X-ray and IR spectra. To study the effect of the morphology on the biodegradation rate, experiments of hydrolysis were also carried out revealing that the parts exhibit different degradation kinetics and different mechanical behavior. .. [edited by Author]it_IT
dc.language.isoenit_IT
dc.publisherUniversita degli studi di Salernoit_IT
dc.subjectTemperature control micromoldingit_IT
dc.titleDesign of a rapid heating/cooling system: control the properties of micro-injection molded partsit_IT
dc.typeDoctoral Thesisit_IT
dc.subject.miurING-IND/24 PRINCIPI DI INGEGNERIA CHIMICAit_IT
dc.contributor.coordinatoreDonsì, Francescoit_IT
dc.description.cicloXXXII cicloit_IT
dc.contributor.tutorPantani, Robertoit_IT
dc.identifier.DipartimentoIngegneria Industrialeit_IT
dc.contributor.refereeWhiteside, Benit_IT
dc.contributor.refereeDe Santis, Feliceit_IT
 Find Full text

Files in this item

Thumbnail
Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record