Please use this identifier to cite or link to this item: http://elea.unisa.it:8080/xmlui/handle/10556/2501
Title: Metaheuristic approaches for Complete Network Signal Setting Design (CNSSD)
Authors: Memoli, Silvio
Belgiorno, Vincenzo
Cantarella, Giulio Erberto
De Luca, Stefano
Keywords: Metaheuristic
Ottimizzazione
Sequenze
Issue Date: 15-Apr-2016
Publisher: Universita degli studi di Salerno
Abstract: In order to mitigate the urban traffic congestion and increase the travelers’ surplus, several policies can be adopted which may be applied in short or long time horizon. With regards to the short term policies, one of the most straightforward is control through traffic lights at single junction or network level. The main goal of traffic control is avoiding that incompatible approaches have green at the same time. With respect to this aim existing methodologies for Signal Setting Design (NSSD) can be divided into two classes as in following described Approach-based (or Phase-based) methods address the signal setting as a periodic scheduling problem: the cycle length, and for each approach the start and the end of the green are considered as decision variables, some binary variables (or some non-linear constraints) are included to avoid incompatible approaches having green at the same time (see for instance Improta and Cantarella, 1987). If needed the stage composition and sequence may easily be obtained from decision variables. Commercial software codes following this methodology are available for single junction control only, such Oscady Pro® (TRL, UK; Burrow, 1987). Once the green timing and scheduling have been carried out for each junction, offsets can be optimized (coordination) using the stage matrices obtained from single junction optimization (possibly together with green splits again) through one of codes mentioned below. Stage-based signal setting methods dealt with that by dividing the cycle length into stages, each one being a time interval during which some mutually compatible approaches have green. Stage composition, say which approaches have green, and sequence, say their order, can be represented through the approach-stage incidence matrix, or stage matrix for short. Once the stage matrix is given for each junction, the cycle length, the green splits and the offsets can be optimised (synchronisation) through some well established commercial software codes. Two of the most commonly used codes are: TRANSYT14® (TRL, UK) (recently TRANSYT15® has been released) and TRANSYT-7F® (FHWA, USA). Both allow to compute the green splits, the offsets and the cycle length by combining a traffic flow model and a signal setting optimiser. Both may be used for coordination (optimisation of offsets only, once green splits are known) or synchronisation. TRANSYT14® generates several (but not all) significant stage sequences to be tested but the optimal solution is not endogenously generated, while TRANSYT-7F® is able to optimise the stage sequence for each single junction starting from the ring and barrier NEMA (i.e. National Electrical Manufacturers Association) phases. Still these methods do not allow for stage matrix optimisation; moreover the effects of stage composition and sequence on network performance are not well analysed in literature... [edited by Author]
Description: 2014 - 2015
URI: http://hdl.handle.net/10556/2501
http://dx.doi.org/10.14273/unisa-901
Appears in Collections:Ingegneria civile per l'ambiente e il territorio

Files in This Item:
File Description SizeFormat 
tesi_S_Memoli.pdftesi di dottorato3.85 MBAdobe PDFView/Open
abstract_in_inglese_S_Memoli.pdfabstract in inglese a cura dell'autore198.1 kBAdobe PDFView/Open
abstract_in_italiano_S_Memoli.pdfabstract in italiano a cura dell’autore201.59 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.